Overview

The 'Classic' range of stainless steel top loading spray wash machines provide a compact and economical method of cleaning of parts and sub-assemblies in engineering workshops. With machines ranging from 360mm up to 800mm in diameter, these machines offer excellent value for money for a wide range of applications.

Specification

The Classic range of machines include, as standard:

• Stainless steel construction
• Adjustable wash timer 0-60 minutes
• Thermostatically controlled electric heating
• Low level alarm with heating protection
• Spray driven basket rotation
• Indicator lamp
• Basket brake
• Lid safety switch
• Emergency stop button

Options

• Motor driven basket
• Oil skimmer, disc type
• Tank insulation
• Stainless steel basket
• Stainless Steel spray pipes
• Steam extractor fan
• Weekly heating timer
• Fine filtration systems

Overview

These high specification top loading spray wash machines are designed by engineers for engineers. Constructed from Stainless Steel, the basket sizes available are 600mm and 1,000mm diameter. These machines provide excellent cleaning performance due to the spray pressures and high liquid flow rates achieved by the pump. The motor driven basket rotates around fixed spray bars.

Specification

• Stainless Steel construction
• Wash height mounted into tank lid for ease of loading
• Rear mounted tank for ease of service access
• Sliding tray with replaceable filter mat above the tank
• Motorised basket, friction driven
• Thermostatically controlled electric heating
• Combined temperature gauge and thermostat
• Tank insulation
• High flow rate and pump pressure
• Capable of accepting loads up to 300Kg
• Low level alarm with heating protection
• Pre-set wash timer, adjustable
• Start/Stop switch with lamp for 'machine running'
• Lid safety switch

Options

• Oil skimmer
• Oil separator
• Heated rinse stage complete with integral tank and recirculation pump
• Cold water rinsing to drain
• Compressed air blast drying stage
• Hot air drying stage
• Pneumatically operated lifting lid
• Automatic water refill
• Automatic detergent dosing
• Manually operated spray lance
• Stainless steel small parts basket
• Weekly heating timer
• Steam extractor fan
• Fine filtration systems

Overview

The 2000 series of rotational spray wash machines clean high volumes of small components. Constructed from Stainless Steel, these machines are excellent at removing oil and swarf from components with blind holes or other entrapment areas. Component handling is kept to a minimum and the parts exit the machine clean and dry. The model 2100 unit is particularly effective in removing contaminants due to the internal spray system.

Specification

• Stainless steel construction
• Internal spray wash system
• Internal hot air drying system
• Stainless Steel hexagonal wash drums with 3mm, 5mm or 8mm diameter holes
• Side mounted tank for ease of service access
• Tank insulation
• Thermostatically controlled electric heating
• Corrosion resistant liquid heater
• Combined temperature gauge and thermostat
• Sliding tray with replaceable filter mat above the tank
• Low level alarm with heating protection
• Program selector switch for 'washing and drying', 'washing only' or 'drying only'
• Pre-set wash and dry timers, adjustable
• Start/Stop switch with lamp for 'machine running'
• door safety switch

Options

• Oil skimmer
• Oil separator
• Hopper for unloading parts, rubber lined
• Roller conveyor with loading chute
• Variable drum speed, 1 rev/min to 4 rev/min
• Oscillating drum system
• Heated rinse stage complete with integral tank and recirculation pump
• Cold water rinsing to drain
• Automatic water refill
• Automatic detergent dosing
• Weekly heating timer
• Fine filtration systems

AS Overview

These robust yet compact front loading spray wash machines are ideal for heavy duty workshop environments. The larger AS-150 is capable of accepting loads up to 800Kg. Constructed from Stainless Steel, the basket sizes available are 900mm diameter and 1,400mm diameter. These machines provide excellent cleaning performance due to the spray pressures and high liquid flow rates achieved by the pump. The spray system rotates around a fixed load.

AS Specification

The AS range of machines include, as standard:

• Stainless steel construction
• Stainless Steel rotating spray system
• Hinged door assisted by two robust gas springs
• Vertically mounted stainless steel wash pump
• 500 µm integral Stainless steel filter
• Thermostatically controlled electric heating
• Combined temperature gauge and thermostat
• Fully insulated machine
• High flow rate and pump pressure
• Capable of accepting loads up to 800Kg
• Low level alarm with heating and pump protection
• Adjustable wash timer
• Start/Stop switch with lamp for 'machine running'
• 24v control circuit
• Door safety switch
• Emergency stop button

AS Options

• Oil skimmer
• Oil separator
• Automatic water refill
• Automatic detergent dosing
• Stainless steel small parts basket
• Weekly heating timer
• Steam extractor fan
• Fine filtration systems
• Manually operated spray lance

AC Overview

These heavy duty front loading spray wash machines are available as both single and multi stage units with options for one, two or three tanks. Constructed from Stainless Steel, the standard sizes range from 1,000mm up to 2,000mm diameter. Larger machine sizes are also available if needed. These machines provide excellent cleaning performance due to clever design principles used in addition to the spray pressures and high liquid flow rates achieved by the pump. The spray system rotates around a fixed load.

AC Specification

The AC range of machines include, as standard:

• Stainless steel construction
• Stainless Steel rotating spray system
• Electrically operated lifting door, automatic
• Side accessible tanks for ease of service access
• 500 µm integral Stainless steel filter
• Lockable tank lid
• Thermostatically controlled electric heating with angled heaters for easy removal
• Fully insulated machine
• High flow rate and pump pressure
• Capable of accepting loads up to 2,000Kg
• Plc controlled operation
• Low level alarm with heating and pump protection
• Weekly timers for heating and oil separation
• 24v control circuit
• Emergency stop button

AC Options

• Load Platform/Trolley
• Automatic loading systems
• Heated rinse stage complete with integral tank and recirculation pump
• Cold water rinsing to drain
• Compressed air blast drying stage
• Hot air drying stage
• Additional rear door
• Oil skimmer
• Oil separator
• Automatic water refill
• Automatic detergent dosing
• Stainless steel small parts basket
• Steam extractor fan
• Fine filtration systems
• Manually operated spray lance
• Gas heating

Overview

The RT and BRC range of machines provide maximum capacity, with the ability of washing smaller basket loads, to suit customers' needs. These heavy duty machines are available as both single and multi stage units with options for one, two or three tanks. Constructed from Stainless Steel, the standard sizes range from 600mm x 400mm x 300mm up to 800mm x 600mm x 500mm. Larger machine sizes are also available if needed. These machines provide excellent cleaning performance due to clever design principles used in addition to the high spray pressures and high liquid flow rates achieved by the pump. The load to be washed rotates around fixed spray bars.

Specification

The RT and BRC range of machines include, as standard:

• Stainless steel construction
• Stainless Steel spray system
• Stainless Steel rotational fixture
• Electrically operated lifting door, automatic
• Side accessible tanks for ease of service access
• 500 µm integral Stainless steel filters
• Lockable tank lid
• Thermostatically controlled electric heating with angled heaters for easy removal
• Fully insulated machine
• High flow rate and pump pressure
• Plc controlled operation
• Low level alarm with heating and pump protection
• Weekly timers for heating and oil separation
• 24v control circuit
• Emergency stop button
• Load platform

Options

• Automatic loading systems
• Rotation speed frequency converter 2 rev per minute ± 50%
• Heated rinse stage complete with integral tank and recirculation pump
• Cold water rinsing to drain
• Compressed air blast drying stage
• Hot air drying stage
• Oil skimmer
• Oil separator
• Automatic water refill with over fill alarm
• Automatic detergent dosing
• Stainless steel small parts basket
• Steam extractor fan
• Fine filtration systems
• Gas heating